Cardi/o® Radar Monitor Safety – White Paper

Cardi/o® Monitors – Engineered for Safety

When assessing a product’s radar/RF safety, comparison to other products commonly used in the same customer environment provide a good reference. As shown in figure 1 below, customer interaction with Cardi/o® RF monitors is Orders of Magnitude Lower in RF Emission than when using ordinary household devices such as cellphones, Wi-Fi, radios and TVs.

 

Cardi/o® state-of-the-art RF and analog engineering makes such safety possible over the entire range of operation, from 1 inch to 10 feet (3 meters). The RF field strength is lower than the ambient level of a typical home, measuring less than .0001 m/W/cm2 at 10 feet (3 meters). This is 1,000X lower than federal guidelines for RF-based consumer electronics.
Figure 1

 

Cardi/o® state-of-the-art RF and analog engineering makes such safety possible over the entire range of operation, from 1 inch to 10 feet (3 meters). The RF field strength is lower than the ambient level of a typical home, measuring less than .0001 m/W/cm2 at 10 feet (3 meters). This is 1,000X lower than federal guidelines for RF-based consumer electronics.

Safety Throughout the Residence 

As depicted in figure 2, Cardi/o® Monitor is safe and can be used in multiple rooms in the same dwelling without any per-room or overall RF safety concern – the RF noise generated by Cardi/o® Monitor is the same level of RF noise generated by common home routers, meeting FCC Safety specifications.
In addition to safety, Cardi/o® sensors are designed to prevent causing interference or being interfered by other RF devices in the same dwelling such as cellphones and TVs and meets FCC RF Interference specifications

 

Use in every room
Figure 2

 

Back to White Papers